J2 Aerial Cable Lasher
86070
The model J2 Cable Lasher is used to lash a single aerial cable or numerous cables to a supporting strand or to an existing lashed cable with stainless steel lashing wire.
- Will lash any single or multiple aerial cables up to 3 in. (76mm) diameter across on any suspension strand from 1/4 in. (6mm) to 7/16 in. (11mm).
- Consists of a rotating drum supported on a carriage that provides the mounting for a driving mechanism, cable Lifters, cable and strand rollers.
- Each of the two recessed magazines will hold a 1200 ft. coil of .045 in. (365m of 1.1mm wire) lashing wire. The lashing wire is fully recessed and covered by a gate.
- Features a fast setup procedure, quick coil loading, and automatic drum lock for easy span transfers and smooth forward travel.
- J2 Lashers make overlashing easy. Just push down on the strand roller knob, rotate it a quarter turn and you can lash additional cables together on previously lashed cable.
- Positive internal gear to gear mechanism has no chains or belts to stretch, slip or break.
- Constructed with heat-treated, plated Steel, stainless Steel, brass and aluminum components. Contains sealed and oiless bearings to minimize maintenance and assure durability.
- Pre-drilled and tapped at the factory for Mounting of the Lasher Guard or “halo”. For use when Lashing in overgrown areas.
- The J2 and every GMP lasher is fully serviceable to “good-as-new” specifications at our factory and at factory-trained service locations around the globe.
- The lasher is furnished with a rugged lightweight storage chest with corrosion resistant hardware, recessed latches and a moisture-proof, tongue-in-groove design for maximum protection when not in use.
- Supplied with a 6 ft. bridle rope assembly and snap hooks, and an information and operation manual.
| P/N | Description | Wire Dia | Weight |
| 86070 | J2 Cable Lasher Standard | .038-.045 | 46 lbs. (20.9kgs) |
| 86071 | J2 Cable Lasher – Modified for 450 ft. of .065 in. wire | .065 | 46 lbs. (20.9kgs) |
| 86072 | J2 Cable Lasher – Modified for 1/2 ” Strand | .045 | 46 lbs. (20.9kgs) |
| 86074 | J2B Cable Lasher – Discontinued – Replaced by J3 Lasher | .045 | 46 lbs. (20.9kgs) |
| 86078 | J2 Cable Lasher – Modified for 5/8 ” Strand | .045 | 46 lbs. (20.9kgs) |
| Various | Lashing Wire | .038, .045, .061, 065 | |
| 03165 | Bridle Rope Assembly only | 3 lbs. (1.4kg) | |
| 08189 | Chest only (Note: J2 Cable Lasher w/Chest Shipping Weight: 65 lbs. (29.6kgs)) | 19 lbs. (8.6kgs) | |
| 70190 | Towing Lanyard 35 ft. (250 lbs. WLL) (optional) | 6 lbs. (2.7kgs) | |
| 70012 | Lasher Guard “Halo” (optional) | 3 lbs. (1.4kg) | |
| 70014 | Lasher Guard Template Tool (Needed to install Halo on older units) | 1 lbs. (.45kg) | |
| 70467 | Cable Lasher Parallel Pull Accessory (optional) | 15.7 lbs. (7.2kg) | |
| 33286 | Ice Breaker Lasher Drive Wheels | 5.5 lb |
Be the first to review “GMP J2 LASHER”
Related products
Sale!
LASHER and POWER ROLLERS
Original price was: $778.00.$500.00Current price is: $500.00.
LASHER and POWER ROLLERS
$5,500.00
Sale!
LASHER and POWER ROLLERS
Original price was: $9,000.00.$8,000.00Current price is: $8,000.00.
Reviews
There are no reviews yet.